using a 16F688, my board got made with a led hooked to pin 4 instead of pin 2, it needs to light on pin high but since #4 is a in only.... future boards will be corrected but on the ones I have now there is no place to cut trace and jumper, what is available is to jumper pins 2 & 4. NOW I am not using MCLR and the program doesnt access pin 4 for anything. So...
Can I send lows and highs out on pin 2 (shorted to pin 4) with #4 connected to LED+ ?
code was already written for Pin 2 to LED.
Can I send lows and highs out on pin 2 (shorted to pin 4) with #4 connected to LED+ ?
code was already written for Pin 2 to LED.